Betopper LPC010-B 54x4w 5562lm PAR Light with Barndoor

良かった点は、RGB➕W ホワイトで白色くっきり、Power Con 電源コネクター思ったより使い勝手が良かったこの２点です。

機能面では、CRIモード90 等搭載しています。
ざっくり言うと光が物の色をどれだけ正確に再現できるかを評価する指数です。

DMX512 の利用も可能です。照明器具の調光や調色などを制御を行う事の通信規格です。

色温度の幅も広くシチュエーションに合わせてセッテングできます。

BETOPPER ステージライト高輝度で軽くて移動も簡単、撮影にも使えて大変便利な商品です。

説明書は一枚でシンプルですが、構造自体もシンプルなので外箱を見ながら組み立て。
遮光板の取り付け方向を確認して緩めに四箇所を留めてから本締め、ロゴは横面に、
スタンドも大きさが違うので間違えようがなく、簡単に組み立ては完了。
説明もとてもシンプルかつ英語ですが、触っているうちに理解は出来ました。

This will not only brighten any stage show or DJ venue, or theatrical production, it's also quite useful for photography, especially thanks to the included barn doors. Great little light in and of itself, but that just adds that little extra je ne sais quoito to bring it all up to a professional level. ?? ??

Externals: Pic-1 is the separate packed support brackets so that there is no scraping the flat black finish Pic-2 is the VERY short PowerCon AC plug (3-feet). Pic-3 is the assembly hand **** for the Pic-1 brackets. Pic-4 is the barn door packaging that is very nicely done. Inside the box is also the mounting screws. Pic 5 is the doors folded from box removal, and Pic-6 is doors open, and Pic-7 is a close-up for the hinges and Pic 8 is the direct mounting of the hinge on the fixture. Notice that the mounting is only on 2 180 degree from each other sides. Pic 9 is a rear view displaying PowerCon (both & and out), DMX (in & out), and control panel.
Internals: Pic-11 is the LED circuit board supporting SMD LEDs 505RGBW, and Pic-12 is a surface mound device that I am (pardon my ignorance) unaware of. Pic-13 is a closeup of the LED (newer design) that does appear to support the seller's advertised 1-watt per color, per LED. Pic-14 is a very well done soldering process, and indicative of a professional system - implementation of a surface mount NTC (negative temperature coefficient) sensing device to prevent damage to the LEDs in the case of fan failure, etc. overheating! KUDOS. This is rarely implemented in MOST similar imports! Pic-15 is the 36-Volt, 160-Watt switch mode power supply with proper and professional AC leads and interlock fastened DC output connector. Pic-16 is the controller/display circuit board Notice that the DC power connector is retained with a push-clip, and all other connectors held in place with anti-vibration dope - PROFESSIONAL! Kudos! Pic-17 is evidence of LocTite type of anti-vibration dope that was used on all mounting screws within the fixture.
This fixture has far more capabilities for color (especially the white spectrum) control for theater and stage use, as well as photography studio. The 216-watts claimed is probably quite accurate and extremely bright!. DMX control for both 4 & 8 channel were tested and conform to the User Manual.

WOW, just like hollywood! Well, at least they look like movie and TV lights with the barn doors, anyway.

SO, these RGBW lights are pretty simple in function. 4 or 8 channel modes that are basic, but that's what I want when using lights along with a DMX control console. The high point here is the Aluminum construction, instead of plastic, and the BRIGHT 200 watt output with all elements driven.

The barn doors do a good job with containing the beam as needed. They do add a bit of extra weight, and the light can be used without the barn doors installed.

This light may seem expensive to some, but it punches WELL above its weight class. I'm quite impressed by the performance.

So, I selected this light because I wanted something to aim at my mirror ball. It's bigger than I expected, and probably a bit overkill for my purposes, but dang! It's bright!

The barn doors keep the light from flooding the room and focused on the mirror ball, which is great because it's throwing 5000 lumens/lux. That's like having your own bat signal in your living room. It has a stand (some assembly required), so it'll sit on the floor just fine. Or you can mount it for those of you with light rigs or pro-grade light set-ups. The fan motor is pretty quiet. I almost didn't notice it when I first plugged it in.

I'm not a DJ or stage manager, so I don't need all the DMX programmable features or daisy-chain options. So all those extra cords just get in the way. The power cord isn't terribly long, so you'll need to have an extension cord or aerial power mount to make it work. It has an on-off switch, but no remote, so keep that in mind if you're trying to use this outside a DMX/pro set up.

This BETOPPER 54 LED Par Light is a substantial stage light. It is well made and heavy-duty. The light is bright and works well. It is also quite versatile. The barndoors are sturdy and enable the angle of the light to be easily adjusted. The light can be placed on the floor or hung. Overall a great option for a bright, functional stage light.

This was perfect for our concert we organised. So bright and will be used on every event and occasion going forwards. Easy to use and easy to change settings.

We use these for our church platform. They work just as well as the big name brands that they hang right next to!

lights provide a ton of light from warm white to cool white with many options available for intensity and quality. Having one small problem with intensity - one light is different from the other but still working with it to sort out issue- might be mine, rather than the light.